- The maximum surface power of the vehicle will be no greater than 13 volts, 25 amps
- The vehicle must operate on DC voltage
- there will be no on board power except for the lights
- the vehicle will have three monitors
- the vehicle must be able to be moved without the aid of electrical powered devices
- ROV must be able to dive and surface in a tank no deeper than 4 meters
- Number of people required is 3
- the vehicle must be able to operate in waters between -1 degrees Celsius and 18 degrees Celsius
- the project will require 8 months of design and construction.
- Hydraulics must not exceed 150 psi.
- Pneumatics must not exceed 40 psi.
- The Rov will be controlled and powered through a tether.
- No onboard power supply is allowed except for lights that use 9 volts or less.
- Tools: Wire cutters, Soldering gun, Wire Strippers, band saw, and welding equipment ( possibly)
- Information: propulsion, buoyancy, robotics, electronics, circuitry, and hydrodynamics.
- Materials: aluminum, PVC, copper wires, insulation for wires
- Capital: anywhere between 500 dollars to 1000 dollars, it all depends on the materials used
Sunday, September 23, 2007
Limitations
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment